|
|
基本技术参数
| 基本技术参数 |
| 主轴直径(N型主轴箱，R型主轴箱 ) |
mm |
130 (N型主轴箱)，
140 (R型主轴箱)
|
| 主轴锥孔规格 |
ISO 50 |
| 主轴转速范围 |
RPM |
10 - 2 500 (N)，
10 - 3 000 (R)
|
| 主电机功率 |
kW |
37 |
| 工作台横向行程(X) |
| rotary table or pallet |
mm |
2 000, 2 500, 3 000,
3 500, 4 000 |
| 主轴箱垂直行程 (Y) |
| - machine with the standard table |
mm |
1 600, 2 000, 2 500 |
| - machine with the pallet (APC equipped) |
mm |
1 400, 1 800, 2 240 |
| 立柱纵向行程 (Z) |
mm |
1 000, 1 250, 1 600, 2 000 |
| 镗轴行程(W 轴) |
mm |
800 (N型主轴箱)，
560 (R型主轴箱) |
| Feeds |
| - X, Y, Z, W |
mm.min-1 |
1 - 6 000 |
| - B |
min-1 |
0,003 - 1,5 |
| Rapid traverse |
| - X (= 2 000 - 3 500 mm), Y, Z, W |
mm.min-1 |
10 000 |
| - X (= 4 000 mm) |
mm.min-1 |
8 000 |
| - B |
min-1 |
2 |
| Minimum height of the spindle axis |
| - above the standard rotary table |
mm |
50 |
| - above the pallet |
mm |
0 |
| Maximum workpiece weight |
| - design with rotary table |
kg |
12 000 |
| - design with pallet |
kg |
8 000 |
| Table clamping surface |
mm |
1 600 x 1 800,
1 800 x 2 240 |
| Pallet clamping surface |
mm |
1 600 x 1 800 |
| Table T-slots |
| - dimension |
mm |
22H8 |
| - pitch |
mm |
160 |
| - quantity |
9, 11 |
| |
| Farther specification |
| Operator lift vertical/horizontal travel |
mm |
1 600 / 600 |
| Hydraulic circuits operational pressure |
MPa |
6,5 - 8 |
| Compressed air source output requirements |
| - pressure |
MPa |
0,6 |
| - volume |
l.sec-1 |
18 |
| Mains voltage / frequency |
V / Hz |
3 x 400 / 50,
3 x 400 / 60 |
| Total power consumption |
kVA |
86 |
| Machine weight |
kg |
according to model setup |
| Noise level "A" at the operator site max. |
dB (A) |
80 |
| |
| Automatic tool change (ATC) equipment |
| Quantity of pockets in magazine |
| - on the column |
40, 60 |
| - next to the column |
80, 120 |
| Pitch of pockets in magazine |
mm |
130 |
| Tool dia max. |
| - full magazine |
mm |
125 - 150 |
| - adjacent pockets free |
mm |
320 |
| Dia max. of a special flat tool |
mm |
390 (600) |
| Tool length max. |
mm |
500 |
| Tool weight max. |
kg |
25 |
| Total weight of tools in magazine |
kg |
750 |
| Imbalance of tools in magazine max. |
kg |
150 |
| Tool change time |
sec |
20 |
| |
| Automatic pallet change (APC) equipment |
|
Quantity of pallets (including those on the pallet stations) in the system
|
2 |
| Maximum workpiece weight |
kg |
8 000 |
| Pallet clamping surface |
mm |
1 600 x 1 800 |
| Pallet T-slots |
| - dimension |
mm |
22H8 |
| - pitch |
mm |
160 |
| - quantity |
9 |
| Total pallet change time |
sec |
85 |
|
|
